EC6601 VLSI DESIGN SYLLABUS FOR 6TH SEM ECE REGULATION 2013 - Anna University Internal marks 2018

EC6601 VLSI DESIGN SYLLABUS FOR 6TH SEM ECE REGULATION 2013

 ANNA UNIVERSITY ECE SYLLABUS
MG6851 PRINCIPLES OF MANAGEMENT SYLLABUS
6TH SEM ECE SYLLABUS
REGULATION 2013
EL7002 MACHINE VISION SYLLABUS
EC6601 VLSI DESIGN SYLLABUS
OBJECTIVES:
 In this course, the MOS circuit realization of the various building blocks that is common to any microprocessor or digital VLSI circuit is studied.
 Architectural choices and performance tradeoffs involved in designing and realizing the circuits in CMOS technology are discussed.
 The main focus in this course is on the transistor circuit level design and realization for digital operation and the issues involved as well as the topics covered are quite distinct from those encountered in courses on CMOS Analog IC design.

UNIT I MOS TRANSISTOR PRINCIPLE
NMOS and PMOS transistors, Process parameters for MOS and CMOS, Electrical properties of CMOS circuits and device modeling, Scaling principles and fundamental limits, CMOS inverter scaling, propagation delays, Stick diagram, Layout diagrams

UNIT II COMBINATIONAL LOGIC CIRCUITS
Examples of Combinational Logic Design, Elmore‟s constant, Pass transistor Logic, Transmission gates, static and dynamic CMOS design, Power dissipation – Low power design principles

UNIT III SEQUENTIAL LOGIC CIRCUITS
Static and Dynamic Latches and Registers, Timing issues, pipelines, clock strategies, Memory architecture and memory control circuits, Low power memory circuits, Synchronous and Asynchronous design

UNIT IVDESIGNING ARITHMETIC BUILDING BLOCKS

Data path circuits, Architectures for ripple carry adders, carry look ahead adders, High speed adders, accumulators, Multipliers, dividers, Barrel shifters, speed and area tradeoff

UNIT V IMPLEMENTATION STRATEGIES

Full custom and Semi custom design, Standard cell design and cell libraries, FPGA building block architectures, FPGA interconnect routing procedures.

TOTAL: 45 PERIODS

OUTCOMES:

Upon completion of the course, students should
 Explain the basic CMOS circuits and the CMOS process technology.
 Discuss the techniques of chip design using programmable devices.
 Model the digital system using Hardware Description Language.

TEXTBOOKS:
1. Jan Rabaey, Anantha Chandrakasan, B.Nikolic, “Digital Integrated Circuits: A Design Perspective”, Second Edition, Prentice Hall of India, 2003.
2. M.J. Smith, “Application Specific Integrated Circuits”, Addisson Wesley, 1997

REFERENCES:
1. N.Weste, K.Eshraghian, “Principles of CMOS VLSI Design”, Second Edition, Addision Wesley 1993
2. R.Jacob Baker, Harry W.LI., David E.Boyee, “CMOS Circuit Design, Layout and Simulation”, Prentice Hall of India 2005
3. A.Pucknell, Kamran Eshraghian, “BASIC VLSI Design”, Third Edition, Prentice Hall of India, 2007.

No comments:

Post a Comment