ANNA UNIVERSITY ECE SYLLABUS
EC6504 MICROPROCESSOR AND MICROCONTROLLER SYLLABUS
OBJECTIVES:EC6504 MICROPROCESSOR AND MICROCONTROLLER SYLLABUS
5TH SEM ECE
REGULATION 2013
The student should be made to:
Study the Architecture of 8086 microprocessor.
Learn the design aspects of I/O and Memory Interfacing circuits.
Study about communication and bus interfacing.
Study the Architecture of 8051 microcontroller.
Learn the design aspects of I/O and Memory Interfacing circuits.
Study about communication and bus interfacing.
Study the Architecture of 8051 microcontroller.
UNIT I THE 8086 MICROPROCESSOR
Introduction to 8086 – Microprocessor architecture – Addressing modes - Instruction set and assembler directives – Assembly language programming – Modular Programming - Linking andRelocation - Stacks - Procedures – Macros – Interrupts and interrupt service routines – Byte and String Manipulation.
UNIT II 8086 SYSTEM BUS STRUCTURE
8086 signals – Basic configurations – System bus timing –System design using 8086 – IO programming – Introduction to Multiprogramming – System Bus Structure - Multiprocessor configurations – Coprocessor, Closely coupled and loosely Coupled configurations – Introduction to advanced processors.
UNIT III I/O INTERFACING
Memory Interfacing and I/O interfacing - Parallel communication interface – Serial communication interface – D/A and A/D Interface - Timer – Keyboard /display controller – Interrupt controller – DMA controller – Programming and applications Case studies: Traffic Light control, LED display , LCD display, Keyboard display interface and Alarm Controller.
UNIT IV MICROCONTROLLER
Architecture of 8051 – Special Function Registers(SFRs) - I/O Pins Ports and Circuits - Instruction set - Addressing modes - Assembly language programming.
UNIT V INTERFACING MICROCONTROLLER
Programming 8051 Timers - Serial Port Programming - Interrupts Programming – LCD & Keyboard Interfacing - ADC, DAC & Sensor Interfacing - External Memory Interface- Stepper Motor and Waveform generation.
TOTAL: 45 PERIODS
OUTCOMES:
At the end of the course, the student should be able to:
Design and implement programs on 8086 microprocessor.
Design I/O circuits.
Design Memory Interfacing circuits.
Design and implement 8051 microcontroller based systems.
TEXT BOOKS:
1. Yu-Cheng Liu, Glenn A.Gibson, “Microcomputer Systems: The 8086 / 8088 Family - Architecture, Programming and Design”, Second Edition, Prentice Hall of India, 2007.
2. Mohamed Ali Mazidi, Janice Gillispie Mazidi, Rolin McKinlay, “The 8051 Microcontroller and Embedded Systems: Using Assembly and C”, Second Edition, Pearson education, 2011.
REFERENCE:
1. Doughlas V.Hall, “Microprocessors and Interfacing, Programming and Hardware”,TMH,2012
No comments:
Post a Comment